Abrasive Garnet For Waterjet Cutting

Garnet abrasive can be used for high pressure water jet cutting. High-pressure water jet cutting machine is a multi-purpose, perfect performance cutting equipment. It sprays ordinary water and garnet sand through a very fine ruby ​​nozzle at a speed of nearly one kilometer per second (three times the speed of sound) after multi-stage supercharging. It uses the hardness and sharp angles of garnet abrasives for cutting. Its biggest feature is non-heat source high-energy jet beam processing.

 

There is no heat process during cutting, so it can cut all metal and non-metal materials, especially materials that are difficult or impossible to process by various thermal cutting methods. High-pressure water jet cutting machine has the characteristics of fast cutting, smooth cutting, no dust, no thermal deformation, no pollution, and reduced material waste. It has been widely used in aviation, military, stone, construction, decoration and other finishing enterprises.

 

Chemical levels (%)		Physical levels		Mineral levels (%)
Silica SiO2	29	Specific gravity	3.8-4.1g/cm	Almandine	92-96
Iron (Fe2O3 + FeO)	31	Bulk density	1.9-2.1g/cm	IImenite	1.0
Alumina Al2O3	17	Hardness	7.5-8.0Mohs	Omphacite	1.5
Magnesium MgO	13	Chloride	＜25ppm	Rutile	0.5
Calcium CaO	8	Acid solubility (HCL)	＜1.0%	Quartz	＜0.1
Manganese MnO	＜0.3	Conductivity	＜83us/cm	Hornblende	＜0.5
Sodium Oxide Na2O	0-1	Melting point	1300℃	Free silica	＜1.0
Titanium Oxide TiO2	1.1	Grain shape	Sub angular

 

 

1. Garnet sandblasting abrasive is selected from high-quality iron aluminum garnet rock ore. It has high hardness, high density, good toughness, sharp corners and sharp edges. It is a high-grade, pure natural non-metallic sandblasting abrasive.

 

2. Garnet sandblasting abrasive is processed according to the highest quality standards, with reasonable particle size distribution, less dust, extremely low soluble salt (chloride) content and conductivity, and does not contain harmful components such as free silicon and heavy metals, and has excellent surface cleaning effect.

 

3. Garnet sandblasting abrasive can penetrate into holes and uneven parts for cleaning, and completely remove scale, rust, soluble salt and other dirt. The sandblasted surface has no embedded objects, no unfavorable convex points and pits, and achieves stronger coating adhesion and longer coating service life.

 

4. Lower cost of use
Garnet sandblasting abrasive, hardness 7.5-8.0, density 4.2g/cm3, sharp edges and corners, excellent cutting effect, large sandblasting area per unit time, low sand consumption per unit area, low sandblasting cost. Thanks to the excellent toughness and low brittleness of garnet sandblasting abrasive, the breakage rate is low during the sandblasting process, and it can be recycled 5-10 times depending on the application occasion, further reducing the customer's cost of use.

 

5. Excellent working environment
Garnet sandblasting abrasive is washed 6 times during the production process, and the dust content is extremely low. At the same time, due to the high specific gravity and fast sedimentation rate of garnet sandblasting abrasive, there is less dust during the sandblasting process and the working environment is excellent.

 

Garnet sandblasting abrasive is widely used in sandblasting and anti-corrosion of offshore drilling platform modules, shipbuilding and repair, petroleum and petrochemical equipment and pipelines, carriages and car bodies, pressure vessels, steel structures, power plants, chemical plants, oil and gas storage tanks, etc.

 

It is used for sandblasting of automotive parts such as superchargers, castings, etc.

 

And garnet sandblasting abrasive is used for sandblasting of surfaces such as aluminum alloys, stainless steel, duplex stainless steel, copper, galvanized parts, and glass.

 

It is the best choice to replace traditional abrasives such as brown corundum, glass beads, copper slag, nickel slag, coal slag, quartz sand, steel shot, and steel grit.

 

Q: What kind of packages you can supply of garnet abrasive?

A: 25kgs bags, bulk bags, pallets, European pallets are all available as request

 

Q: Can you supply customized package of garnet abrasive?

A: of course ! send us what you want to print on bags, we can follow it strictly

 

Q: How do you control your garnet abrasive quality ?

A: All of our orders should be passed by the third party laboratory test before leaving our plants to loading port

 

Q: How long of your delivery?

A: Normally, 1 week after receipt prepayment

 

Q: What's your payment term?

A: T.T, L.C at sight, D.P etc

 

Q: How many production lines of garnet abrasive do you have now ?

A: 3 production lines and over 20 workers

 

Q:What's your production capacity of garnet abrasive?

A: Around 30000 tons yearly

 

Q: How many countries have you exported?

A: More than 15 countries so far, such as: America, South America, South Africa, Europe Italy, Poland, Portugal, Holland, Hungary, East South Asia Malaysia, Thailand, Vietnam etc

 

Q: What's the MOQ of garnet abrasive?

A: One 20'container can load 25-27tons, but less quantity is ok too

 

Q: How many years that you are in abrasives field?

A: 15years, we have professional sales and exporting team

 

Q: How many staff in your company?

A: About 50 people, sales 35, technicians 10, accountants 2, shareholders 3

 

Q: Where is your plant?

A: We are in Zhengzhou Henan province China.

 

Q: Can you offer samples of garnet abrasive?

A: Yes, our sample is free of charge if quantity is less than 500grams

 

Q: How can we place the order?

A: Send us your demand details, such as: product name Brown aluminum oxide, sizes F24 F36 F46, quantity of each size, application for abrasives grinding wheels? cutting discs? Sandblasting? We will do invoice and contract to you, and then arrange production after getting your payment

 

Q: Which way you can delivery the cargo to us?

A: By air, By Sea, By railway

 

Q: Can you send us your customers name of garnet abrasive?

A: Customers name is business secret, and we won't give out your information to other ones in future when start cooperation with you soon

 

Q: Can we visit your plant?

A: Sure! Warmly welcome at anytime

 

Q: Do you have other refractories materials can be supplied?

A: Yes, such as: Black silicon carbide, Bauxite, Graphite etc

 

Q: What's the mainly application of your Abrasives materials?

A: Many of our customers use them in sandblasting and shotblasting

 

Q: Can you offer a discount to us if order quantity is big?

A: Of course! Especially for Brown fused aluminum oxide and White fused aluminum oxide

Hot Tags: abrasive garnet for waterjet cutting, China abrasive garnet for waterjet cutting manufacturers, suppliers, factory, Alumina White, Black Aluminum Oxide, Crushed Glass Blasting, White Fused Alumina WFA, Calcined Bauxite, White Corundum