​green Silicon Grinding Wheel

Green Silicon Carbide Grinding Wheel

Characteristics of green silicon carbide:

1. The abrasive grains are sharp and have high hardness. They can grind hard and brittle materials such as carbide, optical glass, and ceramics.

2. It is brittle, so it is poor at maintaining edges and corners, and is not suitable for machining workpieces with high toughness.

3. It has good thermal conductivity and is suitable for grinding workpieces that are easily deformed by heat.

4. It has good self-sharpening properties and is mostly used for machining carbide, titanium alloy, and optical glass. It is also used for honing cylinder liners and grinding high-speed steel tools. As an abrasive, it can be used as abrasive tools, such as grinding wheels, oilstones, sand tiles, etc.

Green silicon carbide grinding wheel use:

1. When installing, first check the quality of the grinding wheel. If the niobium hammer taps the side of the grinding wheel, the sound is clear and crisp. The installation position of the grinder is the first issue to be considered during the installation process.

2. It is forbidden to install the grinder in a place facing nearby equipment and operators or in a place where people often pass by. Generally, large workshops should be equipped with a dedicated grinding wheel room.

3. If a dedicated grinding wheel room cannot be set up due to the terrain of the workshop, a protective baffle with a height of not less than 1.8m should be installed on the front of the grinder, and the baffle should be firm and effective.

4. Balance problem The imbalance of the grinding wheel is mainly due to the inaccurate manufacture and installation of the grinding wheel, which makes the middle part of the grinding wheel and the shaft incorrect.

Hot Tags: ​green silicon grinding wheel, China ​green silicon grinding wheel manufacturers, suppliers, factory, Steel Shot Blasting, Brown Fused Alumina BFA, Sandblasting Media, Tabular Alumina, White Corundum, Refractories